Professional Awesome 2008-14 Subaru Impreza/WRX STI Third Gen Quick Release Splitter Support System

$305.00$370.00

Description

You know what we hate? All the hassle with tools and time wasted bolting on a splitter after the car comes off the trailer. You know what we hate even more? Taking it off again.

We hated this process so much we came up with the fastest and easiest splitter release system we could think of. No tools needed. It’s strong, adjustable and most of all fast, very fast!

The Professional Awesome Quick Release Splitter Support System uses a latching mechanism to allow for quick mounting and dismounting of your splitter. The latches are designed to hold upwards of 700 lbs. each. They are strong enough to support some of the craziest splitters you can imagine. All that is needed is to add your own release handle and your quick release splitter dreams will be realized.

Exciting Features:

  • Chassis Specific to the 2008-14 Subaru Impreza, WRX, & STI no drilling required! (May fit more, years but this is what’s been tested so far)
  • Extra height adjustment to allow for many different mounting options.
  • Quick-release latching system makes installing a splitter easy.
  • Universal aluminum mounting plates for easy splitter height adjustment.
  • Mounts allow for changes in pitch to optimize performance.
  • All parts are either stainless steel or coated for protection against the elements.

What’s Included:

  • 2 – Short, Aluminum mounts
  • 2 – 2008-14 Subaru Impreza/WRX STI Third Gen Adapter Mounts
  • 2 – Latches, Left and right
  • 2 – Regular or Large Universal splitter receiver mounts with stainless pins (Regular: 6″ wide, 2″ pin height/Large: 12″ wide, 4″ pin height)
  • 8 – M8 x 1.25 JIS Bolts
  • 6 – M6 x 1.00 Bolts for attaching aluminum mounts to latches
  • 4 – M8 x 1.25 Elevator bolts for splitter mounting (8 Elevator bolts included with Optional Spreader Plates
  • 4 – M8 x 1.25 Nyloc nuts for elevator bolts
  • Optional 2 – 7″ x 5″ Spreader Plates

What Elevator Bolts Should You Use?

IMPORTANT NOTES:

  • We recommend using additional support rods, such as our offerings here, as the design of the quick release allows for changes in angle of attack of the splitter.
  • Customers are required to add their own cables to operate the quick release system. These are not included as each vehicle and installation will be customized for the vehicle and its particular use case.

Additional information

WeightN/A
DimensionsN/A
Spreader Plate (used to distribute receiver load over larger area)

Yes (Only with 35mm Elevator Bolts and Regular Receiver Options), No Thanks

Elevator Bolt Length (choose based on splitter thickness)

30mm, 35mm

Receiver

Regular, Large

Reviews

There are no reviews yet.

Be the first to review “Professional Awesome 2008-14 Subaru Impreza/WRX STI Third Gen Quick Release Splitter Support System”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.